skip to Main Content

Shopsmith Main Drive Bearings Set ( Two Bearings )


5 in stock



A New set of Premium Bearings for Shopsmith Mark V Poly V or Gilmer Drive bearings. If you have a Shopsmith mark V then these are the replacement bearings for the main drive.

How to check the bearings?

A – With the bearings removed from the drive, check the bearing for any play,

You should feel non if the bearing is good.

B – Turn the bearing it should turn smooth with no drag for couple of turns.

C – If you turn the bearing and it spin and it keep on spinning it is time to replace it.

D – If you know that your shopsmith is over 10 years and it never had the bearings replaced it is time to replace them.

Back To Top

September is Booked. Free Inspection Time Slots Available For October 2nd. Schedule Now .  No pre payment or credit card is required.